IHSE USA 474 Series Draco major - Manual (Page 71)

Configuration
2011-10-11 71
5.3.2 Access
You can configure the parameters for the access configuration in this
menu.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
Y
(Yes) The user has to login with an user name
and a password once to enter OSD.
Thereafter the user remains logged in
until he explicitly logs out or an Auto
Logout
is done.
Enable Login
N
(No) Function not active (default)
Y
(Yes) The user can only switch to CPU ports
that are unlocked for him in the User
Matrix.
KVM switching with 'Hot Key' commands
is only possible if the user is logged in.
User Matrix
N
(No) Function not active (default)
Y
(Yes) The user can only switch from his
console to CPU ports that are unlocked
in the menu CON Matrix (see
Chapter 5.5.2, Page 93).
CON Matrix
N
(No) Function not active (default)
Y
(Yes) If you open the OSD, the console will be
automatically disconnected from the
current CPU. Only effective with Enable
Login
or User Matrix.
Note:
Only keyboard/mouse connections
will be disconnected, video connections
will be preserved.
Auto
Disconnect
N
(No) Function not active (default)