Ivoclar Vivadent SR Adoro - Manual (Page 53)

53
Practical
Pr
ocedur
e
for
Fixed
Metal-Supported
Restorations
Finishing / Polishing
Finishing
After completion of the polymerization / tempering procedure, completely remove SR Adoro Thermo Guard from the
restoration using running water and/or a steam jet. Finish the restoration with cross-cut tungsten carbide burs, fine
diamonds and flexible disks. It is advisable to use low speed and light pressure. Make sure to rework the entire restoration
to remove the inhibition layer of approximately 30 microns from all surfaces.
Fit the restoration on the model and adjust proximal and occlusal contact points. After that, create a lifelike surface
structure, such as incremental lines and convex / concave areas.
Remove SR Gel and SR Adoro Thermo Guard, adjust contact points, and place the restoration on the model.
Remove the inhibited layer with cross-cut burs and disks ...
... and re-create a true-to-nature shape and surface structure.