Kemppi Promig 200 ML - Manual (Page 4)

PROMIG 200ML/0520 – 4 © KEMPPI OY
Welding power circuit
Isolate yourself by using proper protective clothing, do not wear wet clothing. Never work on a
wet surface or use defect cables. Do not put MIG-gun or welding cables on welding machine or
on other electric equipment. Do not press MIG-gun switch, if the gun is not directed towards a
work piece.
Welding fumes
Take care that there is sufficient ventilation during welding. Take special safety precautions when
welding metals which contain lead, cadmium, zinc, mercury or beryllium.
2. INSTALLATION
2.1. REMOVAL FROM PACKAGING
The equipment is packed in a durable package specially designed for it. It is however necessary
to check the equipment before taking it in use, to make sure that the equipment or a part of it have
not got damaged during the transportation. Also check that the delivery corresponds your order and
that you have received all the necessary instructions for installing and operating the equipment.
The packaging material can be recycled.
2.2. LOCATING THE MACHINE
Place the machine on a horizontal, stable and clean ground. Protect the machine from heavy rain
and burning sunshine. Check that there is enough space for cooling air circulation in front of and
behind the machine.
2.3. SERIAL NUMBER
The serial number of the machine is marked on the machine CE-marking. Identification of the
serial number is the only proper means of maintaining and identifying parts for a specific product.
It is important to make correct reference to the serial number of the product when making repairs
or ordering spare parts.
2.4. INSTALLATION AND MAIN PARTS
2.4.1. Assembling the equipment
Fasten the units by using the screws and bolts delivered with the equipment. Install welding gun
and tighten carefully. Cable connections are presented in the following chapters.