K-Patents PR-03 - Manual

1 1
1 1
INSTRUCTION MANUAL
FOR INLINE REFRACTOMETER
PR-03
WARNING
The process medium may be hot or otherwise hazardous.
Precautions when removing the sensor from the process line:
Make positively sure that the process line is not under pressure. Open a vent valve to the atmosphere.
For a prism wash system, close a hand valve for the wash medium and disable the wash valve.
Loosen the clamp cautiously, be prepared to tighten again.
Be out of the way of any possible splash and ensure the possibility of escape.
Use shields and protective clothing adequate for the process medium.
Do not rely on avoidance of contact with the process medium.
After removal of the sensor, it may be necessary to mount a blind cover for security reasons.
Document/Revision No. INM-3: Rev. 2/4 Effective: February 15 th , 2005
This product manual is delivered to the end user with a K-Patents product.
Information in this manual is subject to change without notice. When the manual is changed,
a revised copy is made available at http://www.kpatents.com/.
Feedback on this manual can be sent by email to [email protected].
THE PASSWORD FOR PR-03 IS 7 8 4 5 1 2 IN PROGRAM VERSIONS 4.0 AND HIGHER.
K-PATENTS OY
Postal address:
P.O. Box 77
FIN-01511 Vantaa, Finland
Tel. + 358-9-825 6640
Fax +358-9-8256 6461
[email protected]
www.kpatents.com
K-PATENTS OY
Street address:
Elannontie 5
FIN-01510 Vantaa, Finland
K-PATENTS, INC.
1804 Centre Point Circle,
Suite 106,
Naperville, IL 60563
Tel. +1-630-955 1545
Fax +1-630-955 1585
[email protected]
www.kpatents.com
Protected by one or more of
the following U.S. patents:
Patent No. 4,571,075
Patent No. 5,563,737
Patent No. 5,009,113
Patent No. 5,617,201
Patent No. 5,309,288
Patent No. 6,067,151