D-Link DFL-700 - Manual (Page 86)

86
Select Tunnel type: LAN-to-LAN tunnel
Remote Net: 192.168.4.0/24
Remote Gateway: 194.0.2.10
Enable “Automatically add a route for the remote network”
Click Apply
3. Setup policies for the new tunnel, Firewall->Policy:
Click Global policy parameters
Enable Allow all VPN traffic: internal->VPN, VPN->internal and VPN->VPN
Click Apply
4. Click Activate and wait for the firewall to restart
This example will allow all traffic between the two offices. To get a more secure solution read
the A more secure LAN-to-LAN VPN solution in this chapter.