Measurement Computing DAQFlex - Manual (Page 38)

DAQFlex Message-based Firmware Specification Hardware Reference – USB-2408 Series
38
Component Supported
Property/Command Set/Get Supported Values/Notes
AOSCAN
1
HIGHCHAN Set/Get 0 to 1
LOWCHAN Set/Get 0 to 1
RANGE, RANGE{ch} Get BIP10V
RESET Set
RATE Set/Get 1 Hz to 1000 Hz (1 channel)
SAMPLES Set/Get
0 to N
(0 = continuous scan; N = 32-bit)
STALL Set/Get ENABLE, DISABLE
START Set
STATUS Get IDLE, RUNNING, UNDERRUN
STOP Set
CTR{ch}
START Set
STOP Set
VALUE
Get 0 to 4,294,967,295
Set 0
DEV
DATATYPE Set/Get ENABLE, DISABLE
FLASHLED/{n} Set 0 to 255
FWV Get MM.mm (M = major; m = minor)
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
RESET/{value} Set DEFAULT
STATUS/ISO Get
Isolated microcontroller status
READY, NOTREADY
DIO{port}
Get 8
LATCH Set/Get 0 to 255
VALUE Set/Get
0 to 255
DIO{port/bit}
LATCH Set/Get
port number: 0
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
VALUE Set/Get
port number: 0
bit number: 0 to 7
port value: 0 to 255
bit value: 0, 1
1 Analog output is supported on the USB-2408-2AO only.