MovinCool Office Pro 63 Service Manual - Manual (Page 49)

Repair Section
49
(2) Relay board
1) Remove nine (9) screws from service panel. (See page 46.)
2) Disconnect ten (10) connectors, and remove five (5) screws from relay board.
(3) Control board
1) Remove two (2) screws from the control panel
stay.
2) Remove three (3) screws from the control panel
stay.
I001793
Temperature Scale Display Switch Dip Switch
Fan Mode Control Switch
To Control Board (10 pin)
To Condensate Pump (2 pin)
To Evap. Fan Motor (HI)
To Evap. Fan Motor (LO)
To Cond. Fan Motor (HI)
To Cond. Fan Motor (LO)
To Comp. Driver Relay
To Comp. Relay
Power (#R1) On Terminal Block
Power (#T1) On Terminal Block Relay Board Fuse
I002179
Screws (2)
I002180
Screws (3)