NavCom SF-3050 Rev.B - Manual (Page 39)

SF-3050 User Guide – Rev B
1-37
odes Menu Item
on the Receiver Setup
). The Set Navigation Modes
Figure 25).
Figure 24: Navigation M
41. Click Navigation Modes
menu (see Figure 24
window opens (see
Figure 25: StarFire Navigation Mode ON
Refer to Figure 25 for the steps below:
42. Click the Retrieve button to retrieve the currently
set navigation modes in the receiver.
43. Click the ON radio button next to StarFire RTG if
StarFire is not enabled.
44. Click the Apply button to enable StarFire
navigation. Then click OK.