Niveo Professional NWA100 - Manual (Page 2)

© Copyright - Netstar Products BV 2014
NWA100 Dual-Band High Power Fat Access Point
The Niveo Professional NWA100 Wireless Access Points is specifically designed to operate in set-
ups for both Residential and commercial applications. The optimal signal of the 2 separate
wireless radio modules assure full coverage, whether in old buildings or modern structures.
Working on 2.4GHz (450M) and 5GHz(450M) simultaneously, wireless speed up to 900 Mbps,
enabling users to enjoy high speed surfing, but also allows for very stable connectivity of control
systems and the possibility of bridging and providing access simultaneously.
The very stable operating devices minimize the occurrence of auto resets and prevent faulty start-
ups after resetting. The flexible and simple web interface facilitates a fast, time saving
configuration process for the installer.
Designed with the End-user in mind
The AP is designed with the end-user in mind. The very inconspicuous exterior makes sure it can
be installed in most residential and commercial spaces. Even the Led lights of the AP’s can be
disabled for installation in sleeping quarters.
Simulated roaming
Niveo Professional’s “Simulated Roaming” technology allows for the roaming of client devices
between the AP’s without the need for expensive Access controllers.
The Access Points are built to make life of the installer easier. The
simple to mount bezel allows for quick installation in a twist-and-
click motion.
The NWA100 can be powered fully with PoE (Power over Ethernet),
avoiding the need for power cabling throughout the building.
The managed Access Points can be configured in up to 8 separate
SSID’s, to allow for simulating different wireless networks like a
guest network. These networks can be configured to give different
users, different rights that are specific to each user and their individual needs (e.g. access the
network or dedicated parts of the network, access internet or just intranet, use VoIP, stream
video, etc.).
The NWA100 offers multiple security modes, which
makes your data transmission safer. The Unified
Management Utility based on X86 allows network
administrators to centrally manage IP Address,
SSID, Security Settings and etc for all the LAN APs.