OpenEye Gen6 N-Series - Manual (Page 55)

56
Day of the Week
Click Single Selection Mode or Multi Selection Mode to switch between modes of scheduling by day
of the week.
Single Selection Mode – Set your schedule one day at a time by selecting the appropriate day.
Multi Selection Mode – Set your schedule for multiple days at once by selecting all the days you want
to configure.
Creating a Recording Schedule (Example)
The following instructions will help you create a simple schedule for cameras 1 through 4. This is
designed as a tool to help you understand how to create a schedule. When you understand the process
of creating a schedule, create one to suit your specific needs.
This example schedule will be configured as follows:

MON-FRI (9AM-5:59PM) all 4 cameras will record using MOTION recording.

MON-FRI (6PM-8:95AM) all 4 cameras will record using CONTINUOUS recording.

SAT-SUN (12AM-11:59PM) all 4 cameras will record using MOTION recording.
1. In the Schedule Number list, select Sch01 .
2. Click Single Selection Mode to change to Multi Selection Mode .
3. Select Mon , Tue , Wed , Thu , and Fri .
4. On the Sch01 row, click and drag your mouse to select the hours 9 – 7 , and then click Set.
5. Click 1 in the Camera section repeatedly, until a green M (motion) appears.
6. Repeat for 2 – 4 in the Camera section.
7. Click Apply to save.