QuickLabel RW-2 - Manual

THREE-YEAR LIMITED WARRANTY
Your RW-2 or RW-8 Label Rewinder (the Unit) is guaranteed to the original end-user
purchaser to be free from defects in materials and workmanship under normal use for
a period of three- (3) years from original date of purchase. (The AC power supply
warranty period is one- (1) year.) This Warranty begins when you purchase the Unit
and continues for the Warranty period unless you sell or rent the Unit, in which case
the Warranty terminates.
In the event Warranty service is required, please contact QuickLabel Systems for a
Return Material Authorization (RMA) number and the location to which the Unit should
be shipped. The Unit must be packed securely for shipment to avoid damage. Origi-
nal packaging is recommended if available. Proof of original purchase must accom-
pany the Unit. The customer assumes all costs incurred in transporting the Unit to
an authorized service center. Upon examination, if the Unit is found to be defective,
it will be repaired or replaced without charge during the Warranty period.
QuickLabel Systems disclaims any implied warranty, including the warranty of mer-
chantability and the warranty of fitness for any particular purpose, and assume no
responsibility or liability for any special, incidental or consequential damages.
This Warranty does not cover damage resulting from accident, misuse, abuse, im-
proper installation or operation, connection to inappropriate power source, lack of
reasonable care, unauthorized modification, the affixing of any attachment not pro-
vided by QuickLabel Systems, or loss of parts. This Warranty is voided in the event
any unauthorized person opens, alters, or attempts to repair the Unit.
QuickLabel Systems
A Product Group of Astro-Med, Inc.
World Headquarters:
600 East Greenwich Avenue
West Warwick, RI 02893
Telephone:
401-828-4000
Toll Free: 877-757-7978
Fax: 401-822-2430
www.QuickLabel.com
E-mail: [email protected]
QLSRW-2 RW-8 Operations Manual.p65
Rev. March 2005
RW-2 Label Rewinder (6” Width)
RW-8 Label Rewinder (10” Width)
Constant Adjustable Torque tm (“CAT”) technology ensures silent operation and
constant, uniform tension on the label takeup reel without dancer or tensioning
arms. The result is a short leader length, exceptionally easy threading, and no
speed adjustments or troublesome clutches, belts, or gears. Dual torque ranges
and a
Torque Control Knob set the desired tension on the RW-2 and RW-8
Rewinders. The Rewinder can also be used as a Label Unwinder.
Rugged, heavy-duty steel construction allows the unit to be conveniently set in
place near the label printer. Special anti-slip feet on the base prevent the unit from
moving.
This reliable, high-quality, maintenance-free unit features a Limited 3 Year Materials
and Workmanship Warranty (see warranty statement for details).
UNPACKING
Remove all parts from the shipping container and verify the contents:
___
User Manual (this document) & Allen Wrench (in plastic bag)
___ Flange Plate (2 each)
___ RW Drive Unit
___ Quick-locking Core Chuck
___
Universal 100 - 240VAC 50-60Hz Power Supply
___ AC Line Cord
SETUP
WARNING! THIS EQUIPMENT IS FOR
INDOOR USE ONLY.
NOT FOR USE IN WET LOCATIONS.
(1) Identify the inner label flange plate as the plastic disc without a center Nylon
hub. Using the two screws found in the end of the locking Core Chuck, affix the
inner flange to the Core Chuck. Tighten snugly, but not too tight.