Error analysis for service personnel, Environment and recycling, Customer service and guarantee – REMKO RKS 327 H User Manual

Page 25

Advertising
background image

25

Error Analysis for

Service Personnel

The units have an error analysis function. The type of
error is indicated by a blinking code on the LED of the
indoor unit.
The following table describes the type of error that oc-
curred using the lit up LEDs.

LED display of the indoor unit

(Different versions depending on model)

Error analysis table

Only authorised personnel may come into contact with
the cold cycle. This ensures that refrigerant does not es-
cape into the environment when the unit is being re-
paired.
Both the refrigerant and the system parts are subject to
special requirements for disposal.
The refrigerant in use is a safety refrigerant. This means
that, should damage occur, the quantities released will
not cause injury to the respiratory systems of people
and animals.

Important information about recycling!

Environment
and Recycling

G

Operation/handling which does not comply with
these instructions is prohibited!
In cases of non-compliance, we assume no liability
and the guarantee becomes null and void.

Customer Service
and Guarantee

For the guarantee to be valid, the purchaser or his cus-
tomer must completely fill out the "guarantee certificate"
enclosed with all units and send it back to REMKO GmbH
& Co. KG

.

The units are repeatedly tested at the production site to
ensure that they are working properly. If a malfunction
occurs that cannot be eliminated by the operating per-
sonnel, please contact your dealer or contact person.

G

Do not touch the liquid refrigerant as it can freeze
the skin!

Proper use

The outdoor parts have been designed and fitted exclu-
sively for operation with REMKO indoor units belonging
to the RKS series.
The manufacturer assumes no liability for damage re-
sulting from non-compliance with manufacturer specifi-
cations and legal requirements, or if modifications are
made to the units.

not activated

blink rate 5 Hz






LED Status

Excess current in compressor, four
times an hour

Evaporator fan is not OK

Error in the main board

Sensor frost protection (indoor unit)
defective

Sensor circulation temperature
(indoor unit) defective

Fuse for the evaporator fan defective

OPERAT

ION

TI

M

E

R

PRE.-DEF

OPERATION

TIMER

PRE.-DEF

AUTO

Advertising
This manual is related to the following products: