RGBLink CP 3072 Quick Start - Manual (Page 16)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
15
4. Turn the knob, and choose <BLEND WIDTH>, push the knob to confirm. Turn the knob to set
the blend width.
5. If image quality distorts by improper operation, it can be recover by reset.
How to Realize the DSK Setting
1. First, set PIP mode, or user can not set DSK.
2. Push the [DSK] button in DSK Operation Area, and enter to the DSK menus.
SELECT: User can choose the signal of A BUS channel or B BUS channel.
MODE: There are 2 kinds of preset modes, DSK and KEY.
COLOR: The colors include white, yellow, cyan, green, red, blue and black.
BACKGROUND: User can choose black or blue.
Y, Cb, Cr OFFSET. User can optimize the effect if DSK or KEY is poor by color offset setting.
Suggest priority setting of Y offset value. If image quality distorts by improper operation, it can
be recover by reset.
3. Turn the KEY LEVEL knob to set the Alpha, the adjustment range is 0 to 100.
How to Save the Parameter
There are 4 pages and each page has 4 save modes, CP 3072 provides 16 save modes.
1. Push the [SAVE] button, the button light turns on, and PAGE, 1, 2, 3 and 4 button lights flash.
2. First set PAGE, for example, choose 1.
3. Then set BANK, buttons 1 to 4 are on or flash, the button on can be saved and flash will be
overwrite, push the button on to save.