Power, 3: genlock output, Dial switch – RGBLink MSP 200 User Manual User Manual
Page 25: Usb interface, Battery status indicator, Reset button, Hardware orientation
2. Hardware Orientation
Interface Description
MSP 200 User Manual 25
1: Power
Use for battery charge, this device uses battery S-8972, LIB 7.2V, 6.6Ah
47wh, compatible with SONY NP-F970 NP-F770.
2. 3: Genlock Output
Genlock output interface, connect to the next level device with Genlock
input.
4: Dial Switch
If the two dial switches are upwards, the device is in normal work, and if
they are downwards, the device is in upgrade state.
5: USB Interface
Remote communication device controls interface, and is used to connect
the computer.
6: Battery Status Indicator
When the battery is charging, the indicator light will glow.
When finish charging, the indicator light is off.
When plug into the power supply without battery, the indicator light flashes.
7: Reset Button
If the touch screen works improperly due to incorrect screen calibration,
push Reset button to modify.