SONOSAX SX-M32 - Manual (Page 21)

User manual SONOSAX SX-M32 Page 21 of 25
6.1.3 Purchase order form
Distributor / Dealer: ………………………………….…. P.O. nr : ……..………… Date of order : …………………..
Customer, end user: ………………………………….... Serial Nr: ……………….. Expected delivery date: …………
Communications / Notes: ……………………………………………………………………………………………………………..
……………………………………………………………………………………………………………………………………………….
……………………………………………………………………………………………………………………………………………….
STANDARD VERSION
2 x XLR3-M and one blank panel
DIRECT OUTPUTS VERSION "A" DIRECT OUTPUTS VERSION "B"
2 x XLR-3M and 1 x XLR-7-M for direct out 1 x XLR-5M for Main L&R, 1 x XLR-7-M for direct out
and 1 x Blank panel
OPTION PANELS
HIROSE 10 Pin TAJIMI 12 Pin HIROSE 12 Pin NEUTRIK MINICON OTHER
RM15TRD-10S PRC 05R 12F HR10A-10R-12S MRF12 Please specify
TECHNICAL SET-UP
** denotes standard factory set-up
Nominal output Line Level:
+4dBu +6dBu** Line Level at balanced outputs, for 0 reading on peak-meter
SUB-OUT ATT Output level:
…….. dBu In ATT position the output level can be adjusted from -24dBu** to +6dBu
MONO-OUT ATT Output level: …..… dBu In ATT position the output level can be adjusted from -24dBu** to +6dBu
MASTER LIMITER:
Set at Nominal Line Level**
Set at -3dBFS for protection of the A/D Converter
PFL Activation :
activated with LF Cut knob only** activated with either LF CUT or GAIN
PFL or AFL monitoring PFL monitoring** ( Pre Fader ) AFL Monitoring ( After Fader )
Modulometers:
Follow the Monitor selector** Always indicates Main Out Levels
A/D Converter, Fs and bit rates:
48 / 96 kHz at 24 bits**
48 kHz dithered to 16 bits / 96kHz at 24 bits
Digital Ouptut: AES-31** transformer balanced SPDIF output
For any purchase order of SONOSAX SX-M32, Please check the appropriate boxes and return this form to SONOSAX
by e-mail :
[email protected] or by Fax.: +41 21 651 01 09