Westermo GD-01 - Manual (Page 138)

138 6196-2220
+WCCS – Custom Character Set
Description:
This command allows to edit and display the custom character set tables.
The “CUSTOM” mode of +CSCS and the +WPCS commands use this character set.
In this mode, when the user enters a string, this string is converted into GSM alphabet
using the Custom To GSM table. In a similar way, when the user requests a string
display, the string is converted from GSM alphabet using the GSM To Custom table.
In edition mode, the edition session is terminated by <ctrl-Z>, or aborted by <ESC>.
Only hexadecimal characters (‘0’...’9’, ‘A’...’F’) can be used.The number of characters
entered must equal the edition range requested, otherwise the command will terminate
with a “+CME ERROR: 3” result.
Syntax:
AT+WCCS=<mode>,<table>,<char 1>[,<char 2>]
Command example Possible responses Note
AT+WCCS=0,0,120,130 +WCCS: 11,78797A202 Display from character
0202020097E05 120 to character 130
OK of the Custom To GSM
conversion table.
Note: 11 characters
displayed
AT+WCCS=1,0,115<CR> OK Edit character 115 of the
20<ctrl-Z> Custom To Custom
conversion table,GSM
conversion table, result:
edition successful
AT+WCCS=1,1,0,4<CR> OK Edit the 5 first characters
40A324A5E8<ctrl-Z> of the GSM To result:
edition successful
AT+WCCS=1,1,200 +CME ERROR: 3 Edit character 200 of
GSM To Custom
conversion table, result:
index out of range
B A C K