Westermo GD-01 - Manual (Page 76)

76 6196-2220
<mode>
0: Disable
1: Enable
2: Interrogate
3: Registration
4: Erasure
<class>
1: Voice
2: Data
3: Fax
4: Short Messages
5: All classes
NOTE: The combination of different classes is not supported, it will only result in the
activation / deactivation / status request of all classes.
In the case where the FDN phonebook is activated, the registration is restricted to the
phone numbers written in the FDN.
<subaddr> not managed
<satype> not managed
<time> For <reason> = 2 (No reply), 4 (all call forwarding) and 5
(all conditional call forwarding), time to wait (1 to 30)
in seconds before call is forwarded. Default value is 20.
+CLCK – Call barring
Description:
This command allows control of the call barring supplementary service. Locking, unlock-
ing or querying the status of call barring is possible for all classes or for a class.
Syntax:
AT+CLCK= <fac>, <mode> [, <password> [, <class> ] ]
Response Syntax: (for <mode>=2 and command successful)
+CLCK: <status> [, <class1> [ <CR><LF>+CLCK: <status>, <class2> [... ] ]
Command example Possible responses Note
AT+CLCK=”AO”,1,1234 OK Command valid
AT+CLCK=”AO”,0,5555 +CME ERROR: 16 Wrong password
AT+CLCK=”AO”,0,1234 OK Command valid
B A C K