H3C Technologies H3C S5560 Series Switches - Manual (Page 68)

59
Figure 71 S5560-54C-PWR-EI rear panel
(1) Grounding screw (2) Interface card slot
(3) Fan tray slot 1 (4) Fan tray slot 2
(5) Power module slot 1 (6) Power module slot 2
The S5560-54C-PWR-EI switch comes with power module slot 1 empty and power module slot 2
installed with a filler panel. You can install one or two power modules for the switch as required. In this
figure, two PSR720-56A AC power modules are installed in the power module slots. For more
information about installing and removing a power module, see " Installing/removing a power module ."
The S5560-54C-PWR-EI switch comes with the two fan tray slots empty. You must install two fan trays of
the same model for the switch. In this figure, two LSPM1FANSA fan trays are installed in the fan tray slots.
For more information about installing and removing a fan tray, see " Installing/removing a fan tray ."
The S5560-54C-PWR-EI switch comes with a filler panel in the interface card slot. You can select an
interface card for the switch as required. In this figure, an LSWM2QP2P interface card is installed in the
interface card slot. For more information about installing and removing an interface card, see
" Installing/removing an interface card ."
S5560-54QS-EI
Figure 72 S5560-54QS-EI front panel
(1) 10/100/1000Base-T autosensing Ethernet port (2) 10/100/1000Base-T autosensing Ethernet port LED
(3) SFP+ port
(4) SFP+ port LED
(5) QSFP+ port (6) QSFP+ port LED
(7) System status LED (SYS)