H3C Technologies H3C S5560 Series Switches - Manual (Page 69)

60
Figure 73 S5560-54QS-EI rear panel
(1) Grounding screw (2) Fan tray slot 1
(3) ACT LED for the management Ethernet port (4) LINK LED for the management Ethernet port
(5) Management Ethernet port (6) Console port
(7) USB mini console port (8) USB port
(9) Fan tray slot 2 (10) Power module slot 1
(11) Power module slot 2
The S5560-54QS-EI switch comes with power module slot 1 empty and power module slot 2 installed
with a filler panel. You can install one or two power modules for the switch as required. In this figure,
two PSR150-A1 AC power modules are installed in the power module slots. For more information about
installing and removing a power module, see " Installing/removing a power module ."
The S5560-54QS-EI switch comes with the two fan tray slots empty. You must install two fan trays of the
same model for the switch. In this figure, two LSPM1FANSA fan trays are installed in the fan tray slots. For
more information about installing and removing a fan tray, see " Installing/removing a fan tray ."
Technical specifications
Table 10 Technical specifications for non-PoE switch models
Item
S5560-30S-
EI
S5560-54S-
EI
S5560-30F-
EI
S5560-30C-
EI
S5560-54C-
EI
S5560-54Q
S-EI
Dimension
s (H × W
× D)
43.6 × 440 ×
260 mm
(1.72 ×
17.32
×10.24 in)
43.6 × 440 ×
260 mm
(1.72 ×
17.32
×10.24 in)
43.6 × 440 ×
360 mm
(1.72 ×
17.32 ×
14.17 in)
43.6 × 440 ×
360 mm
(1.72 ×
17.32 ×
14.17 in)
43.6 × 440 ×
360 mm
(1.72 ×
17.32 ×
14.17 in)
43.6 × 440 ×
360 mm
(1.72 ×
17.32 ×
14.17 in)
Weight
≤ 5 kg
(11.02 lb) ≤ 5 kg
(11.02 lb) ≤ 7.5 kg
(16.53 lb) ≤ 7.5 kg
(16.53 lb) ≤ 7.5 kg
(16.53 lb) ≤ 7.5 kg
(16.53 lb)
Console
ports
• 1 × USB mini console port
• 1 × serial console port
Only the USB mini console port is available when you connect both ports.
USB ports 1 1 1 1 1 1
Managem
ent
Ethernet
ports
N/A N/A 1 1 1 2
QSFP+
ports
2 2 N/A N/A N/A 2