Polaris 2012 FS IQ WideTrak - Manual (Page 117)

113
MAINTENANCE
Brakes
Bleeding the Hydraulic Brake System
5. Close the bleeder valve and release the brake lever.
6. Repeat steps 4 and 5 until fluid flows from the bleeder valve in a
solid stream free of air bubbles.
WARNING! Overfilling the master cylinder leaves no room for fluid expansion
and may cause the brakes to lock, resulting in serious injury or death. Always
add brake fluid to the fill line as recommended.
7. After bleeding is complete, refill the reservoir to the proper level.
See page 61.
8. Reinstall the gasket and cover.