Polaris 2012 FS IQ WideTrak - Manual (Page 47)

43
FEATURES
Instrumentation
MFD Digital Display Programs
Engine Program
Press and release the MODE button until the engine program screen is
active. The default display for this screen includes engine hours, electri-
cal system voltage level, fuel level (if equipped) and either engine cool-
ant temperature, air temperature (accessory) or altimeter (accessory).
Press and release the SET button to cycle through the following screens:
hour meter, engine temperature, air temperature (available as an acces-
sory), altimeter (available as an accessory) and turbo boost (if
equipped).
Hour Meter
The hour meter records the total hours of
engine operation since manufacture. This
meter cannot be reset.
Engine Temperature
A thermometer measures water temperature,
giving an indication of engine temperature.
Air Temperature (if equipped)
The MFD displays actual air temperature in
either standard or metric units.
1. Enter the Engine Program.
2. Press and hold the MODE switch for ten
seconds to switch between standard and
metric units of measurement.