Maintenance and lubrication, Lubrication recommendations, Lubrication chart key – Polaris Series 11 Polaris Ranger 4x4 User Manual

Page 60

Advertising
background image

58

MAINTENANCE AND LUBRICATION

Lubrication Recommendations

NOTE: Hours are based on 10 mph average. If service is due at 20

hours, the equivalent odometer reading would be 200 miles. Perform

all services at whichever reading is reached first.

Lubrication Chart Key

"

More often under severe use, such as wet or dusty conditions

L

Polaris Premium all Season Grease or grease conforming to NLGI

No. 2, such as Conoco Superlube M or Mobilegrease Special

F

Use Polaris Premium U-Joint Lube every 500 miles, before long

periods of storage, or after pressure washing or submerging.

Item

Lube

Method

Frequency

Engine Oil

Polaris Premium

4 Synthetic

0W40

Add to proper level on dipstick.

Check level

daily.

Brake Fluid

DOT 3 or DOT 4

Maintain level between fill lines.

See page 84.

As required;

change every

200 hours

Main

Gearcase Oil

(Transmission)

Premium

Synthetic

Gearcase Lube

Maintain at the bottom of the fill

plug threads. See page 66.

Check monthly;

Change annually

Front

Gearcase Oil

Premium Drive

Hub Fluid

Maintain 3/4” (19 mm) below

the bottom thread of the fill plug

hole. See page 67.

Check monthly;

Change annually

Middle

Gearcase Oil

Premium

Gearcase Lube

Maintain at the bottom of the fill

plug threads. See page 68.

Check monthly;

Change annually

Rear

Gearcase Oil

Premium

Gearcase Lube

Maintain at the bottom of the fill

plug threads. See page 69.

Check monthly;

Change annually

(1) Prop Shaft

U-joints

F

Grease

Locate fittings and grease

50 hours

Front Prop

Shaft Yoke

F

Grease

Locate fittings and grease

(3 pumps maximum)

50 hours

Ball Joint

"

L

Grease

Locate fitting (back side of

struts), grease with grease gun.

50 hours

(2) Swing Arm

Bushings

L

Grease

Locate fittings on swing arm

and grease with grease gun.

25 hours

Advertising