Program erase – complete program reset, Program erase – complete controller reset – Irritrol MC-E User Manual
Page 28
Program Erase – Complete Program Reset
Activating this function will erase all saved irrigation programs in the MC-E controller. However, it will not erase the
current time, date or any Option or SETUP settings.
Reset All Programs
Step 1 – Place the Function Dial to the Program Erase
position.
Step 2 – Enter
and press
.
Press the
button to clear any “Key Entry Error”.
Press the
button to exit or press
to accept.
Step 3 – Return the Function dial to AUTO/RUN
position to exit Program Erase.
Program Erase – Complete Controller Reset
Activating this function will erase all data settings in the MC-E controller. The firmware will revert back to factory default
settings.
Reset the Controller
Step 1 – Place the Function Dial to the Program Erase
position.
Step 2 – Enter
and press
.
Press the
button to clear any “Key Entry Error”.
Press the
button to exit or press
to accept.
Step 3 – Return the Function dial to AUTO/RUN
position to exit Program Erase.