Display detection, Onbaord gpu, Frame buffer size – EVGA 730I User Manual
Page 51: Hpet support, Retrain pcie dev to gen2
Configuring the BIOS
EVGA
41
Display Detection
This item enabling will cause System BIOS to search for monitor connected if
boot prefer (BGPU) does not have monitor connected. The options are
Enabled and Disabled
Onbaord GPU
This item allows you to set the onboard GPU. Select the
[Enable If No
Ext GPU]
to enable the onboard GPU, if the system no detects any external
graphics card. Select the
[Always Enable]
to always enable the onboard
GPU.
Frame Buffer Size
When you set the iGPU Frame Buffer Control item to
[Manual]
then allows
you to set frame buffer size for onboard GPU. The options are 16M, 32M,
64M, 128M, 256M, 512M and Disabled. If you install a Hybrid SLI card, the
options are 256M and 512M.
HPET Support
This function allows you to enable or disable the High Precision Even Timer
(HPET). When Enabled, HPET is used as the timing hardware for multimedia
and other time-sensitive application. When HPET is Disabled, the APIC timer
is used.
Retrain PCIE dev to Gen2
By default all capable devices populated in PCIE slots will be retrained to Gen2
speed. This can be disabled (to force Gen1 only). The options are Disabled and
Enabled.