EVGA 730I - Manual (Page 54)

EVGA
44
Storage Config
Press Enter to display the Storage Config menu.
‰ DMA transfer access
Use this function to enable or disable DMA transfer access.
‰ Prefetch Mode
Use this function to enable or disable the
Prefetch mode
.
‰ HDD Block Mode
Using this function on the Integrated Peripherals menu allows your hard drive
needs to support block mode. Select
[Enabled]
to automatically detect the
optimal number of block read/writes per sector the drive can support. Select
[Disabled]
if your drive does not support block mode.
‰ SATA Controller
This function allows you to enable specific SATA controllers, enable all
controllers, or disable all controllers.
‰ SATA Operation Mode
This is allows you set the onboard Serial SATA mode.
¾ IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage
devices.
¾ RAID: Create a RAID 0, 1, 0+1, 5 and JBOD configuration.
¾ AHCI: Use the AHCI (Advanced Host Controller Interface) to enables
advanced SATA features for improved performance with NCQ and
Hot-plug features
¾ Linux AHCI: Use the function for Linux AHCI.
DMA transfer access [Enabled]
Prefetch Mode [Enabled]
HDD Block Mode [Enabled]
SATA Controller [Enabled]
SATA Operation Mode [IDE]
SATA SALP Features [OFF]
JMB363 ATA Controller [Enabled]
JMB363 Mode [IDE]