Precision Medical EasyPulse5 Oxygen Conserving Regulator - Manual (Page 11)

10
6. To remove the Conserver from cylinder:
• Completely close oxygen cylinder valve.
• Turn the Conserver dial to any “Continuous” position.
• Wait for oxygen to stop flowing from Conserver.
• Remove the Conserver from cylinder valve.
• DO NOT try to loosen T-handle beyond stop. Damage to the
Conserver will occur.
DANGER
NEVER attempt to remove the Conserver from a cylinder unless
the cylinder valve is closed.
WARNING
• When pointer on contents gauge enters red zone, (500 psi (3447 kPa)
and below), it is recommended to change to a full oxygen cylinder.
• NO OXYGEN is delivered in between settings.
To avoid injury to patient:
• ALWAYS confirm prescribed setting before administering to
patient and monitor flow on a frequent basis.
WARNING
• Use only Precision Medical, Inc. carry bag designed for the
EasyPulse5 to prevent an oxygen enriched environment.
• DO NOT place the unit under clothing while in use. When
the Conserver is in use, a small amount of oxygen is vented.
Wearing the unit under clothing may saturate fabrics with
oxygen and cause them to burn rapidly, if exposed to sparks or
flame. It may take several hours for oxygen levels in fabrics to
return to normal.
• ALWAYS insert cylinder and Conserver into bag, cylinder first
with gauge facing mesh. Reference accessory photo, (pg. 13).