Riello UPS MultiCOM 401 - Manual (Page 5)

5
PRESENTATION
D ESCRIPTION
MultiCOM 401 allows you to connect the UPS to a Profibus DP network. The device enables to
integrate, in industrial enviroment, the management and monitoring of the UPS into a control
system based on one of the most popular field bus designed especially for communication
between automation control systems and distributed I/O. Baud rates from 9.6 kbit/s up to 12 Mbit/s
are supported and automatically detected.
The device also offers an RS-232 serial line through which the UPS can be monitored using the
GPSER protocol (PRTK code: GPSER11201...).
• A: RS-232 communication port
• B: PROFIBUS connector
• C: power supply connector
• D: connector for connection to the UPS