RIGOL DG5000 Series - Manual (Page 142)

RIGOL Chapter 9 Store and Recall
User’s Guide for DG5000 9-2
Storage System Overview
DG5000 could store the current instrument state or waveform data in local or external
memory and recall them when needed.
DG5000 provides a local and two external directories. The local directory is “C Disk”
and the external directories are “D Disk” and “E Disk”.
 C Disk: with 1G Bytes capacity, provides built-in file management system which
could execute conventional file operations (similar to USB storage device). The
arbitrary waveform data can be downloaded to C Disk through remote command
and the files in USB storage device can also be copied to C Disk.
 D Disk: when the USB Host at the front panel detects USB storage device, D disk
is available. Its operation mode is the same as the C Disk’s.
 E Disk: when the USB Host at the rear panel detects USB storage device, E disk is
available. Its operation mode is the same as the C Disk’s.
Press the front panel key Store/Recall to enable the Store/Recall function (the key
backlight goes on) and open the Store/Recall interface shown as below.
Figure 9-1 Store/Recall Interface
Note: DG5000 could identify the file whose file name consists of Chinese or English
Route Directory Display Area File/Folder Display Area