RIGOL DG5000 Series - Manual (Page 214)

RIGOL Chapter 13 Specifications
User’s Guide for DG5000 13-6
Carrier
Waveform Sine (max. 200
MHz) Sine (max. 200
MHz) Sine (max. 100
MHz) Sine (max. 70
MHz)
Source Internal/External
Code Pattern PN Sequence, 4 bits code pattern, User
IQ Mapping 4QAM, 8QAM, 16QAM, 32QAM, 64QAM, BPSK, QPSK, OQPSK, 8PSK, 16PSK,
User
Code Rate 1 bps to 1M bps
External Modulation Input
Input Range
±5 Vac
Input
Bandwidth
50 kHz
Input
Impedance
10 kΩ
Burst Characteristics
Carrier
Waveforms
Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier
Frequency 1 μHz to 120 MHz 1 μHz to 120 MHz 1 μHz to 100 MHz 1 μHz to 70 MHz
Burst Count 1 to 1 000 000 or Infinite
Start/Stop
Phase 0° to 360°
Internal Period 1 μs to 500 s
Gated Source
External Trigger
Trigger Source Internal, External or Manual
Trigger Delay 0 ns to 85 s
Sweep Characteristics
Carrier
Waveforms
Sine, Square, Ramp, Arb (except DC)
Type Linear, Log or Step
Direction Up or Down
Start/Stop
Frequency 1 μHz to 250 MHz 1 μHz to 250 MHz 1 μHz to 100 MHz 1 μHz to 70 MHz
Sweep Time 1 ms to 300 s
Hold/Return
Time 0 ms to 300 s