EFJohnson VR-CM50 - Manual (Page 17)

CENTRAL PROCESSOR PACKAGE INSTALLATION
2-7
February 1996
Part No. 004-3039-274
2.7 CPP I/O PANELS
CPPs with a capacity of twenty or more cards
will have one or more CPP I/O panels as shown in
Figure 2-6. If there is more than one I/O panel, each
panel is numbered. The I/O panels are hinged to allow
easy access to the rear of the card cages. In routing
the I/O cables, all wiring should be dressed from the
hinge side of the panel.
Fourteen card CPPs have a single I/O panel as
shown in Fig. 2-9. This panel is at the lower left side
of the cabinet as viewed from the rear. This panel is
fixed in position - no rear access is required.
Figure 2-6 CPP I/O PANELS