Extron Electronics P-2 DA2 WM F, WM F AAP, EC F, D - Manual (Page 6)

P/2 DA2 WM/EC/D/AAP Series • Introduction P/2 DA2 WM/EC/D/AAP Series • Introduction
2
Chapter Two
Controls and Installation
Front and Rear Panels
Installing the P/2 DA2 WM F/EC F
Installing the P/2 DA2 D
P/2 DA2 WM/EC/D/AAP Series
Introduction
About the P/2 DA2 WM F/EC F, AAP, and D
Models
The P/2 DA2 WM F/F EC, AAP, and D models are one input,
two output, high resolution VGA/XGA distribution amplifiers
with audio. With a video bandwidth of 300 MHz, these
distribution amplifiers are compatible with VGA, SVGA, VESA,
XGA, and SXGA graphics cards, monitors, projectors, and LCD
panels. The D model features Decora
® faceplates and trim.
For audio, the P/2 DA2 WM F/EC F and D feature a 3.5 mm
female jack for input and a 3.5 mm captive screw connector for
balanced or unbalanced output. The D model features a DIP
switch for selecting stereo or dual mono output.
The P/2 DA2 WM F is the wallmount version and the
P/2 DA2 WM EC F is the Euro Channel version. The
P/2 DA2 WM F AAP and the P/2 DA2 WM EC F AAP are the
same base products, but with AAP faceplates added. These
plates are a convenient method of providing various
connectors for most audio and video applications.
Features
2-color power/signal LED — When the interface is on, the
power/signal LED lights amber. When the interface is on
and a signal is present, the LED lights green.
Gain/peak control — Compensates for signal degradation
caused by long cable lengths.
Stereo audio — Front panel audio input jack and a 3.5 mm
captive screw output connector on the rear panel.
Buffered local monitor output — 15-pin HD female connector
Computer video input — 15-pin HD female connector
Wall mountable (WM model) — Self-contained enclosure
provides for convenient wall mounting.
Euro Channel mountable (EC model) — This model mounts
easily in the Euro Channel raceway
Optional architectural adapter plates — The
P/2 DA2 WM F AAP may be user-configured with up to
four Architectural Adapter Plates (three for the EC AAP
version). These adapter plates provide a selection of
pass-through signal connectors for various audio and
video requirements.
1-2