Avago Technologies MegaRAID Fast Path Software - Manual (Page 131)

LSI Corporation Confidential | July 2011 Page 131
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility | Selecting SafeStore Encryption Services Security
Options
Figure 80: Enable Drive Security – Enter Pass Phrase
9. To use a pass phrase, select the Use a pass phrase in addition to the security key
check box.
10. Enter a new pass phrase, and enter the new pass phrase again to confirm.
The pass phrase is case-sensitive. It must be between 8 and 32 characters and
contain at least one number, one lowercase letter, one uppercase letter, and one
non-alphanumeric character (e.g., < > @ +). The space character is not permitted.
NOTE: Non-U.S. keyboard users must be careful not to enter double-byte character set
(DBCS) characters in the Pass Phrase field or Security Key field. Firmware works only
with the ASCII character set.
11. Click Accept.
The Confirm Enable Drive Security dialog appears, as shown in Figure 81 .