Avago Technologies LSI7104EP-LC - Manual (Page 33)

Physical Characteristics 2-13
Ver. 2.1 Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
The component height on the top and bottom of the board conforms to
the PCI-X/133 Specification, Revision 1.0a.
Figure 2.5 illustrates the
major components on the LSI7104LXP-LC.
Figure 2.5 LSI7104LXP-LC Host Adapter Configuration
2.8.6 LSI7104LXP-LC Connector and Indicator LEDs
The LSI7104LXP-LC I/O bracket is configured as shown in Figure 2.6 .
The LC connector provides the connection from the adapter channel to
the FC subsystem. This host adapter features two LED indicators. The
LEDs indicate Port 0 status. Refer to
Table 2.8 for an explanation of LED
color codes.
Figure 2.6 LSI7104LXP-LC Connector and Indicator LEDs
J1_T
LSIFC949X
SRAM (X2)
Osc.
Port 0, SFP
Voltage
Regulator
Flash
Voltage
Regulator
LS
I710
4LXP
-LC
Port 0 Activity/Fault LED Port 0 Link Speed LED