PLANET WGSD-8020 - Manual (Page 66)

User’s Manual of WGSD-8020
66
4.2.17 System Reboot
The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user have to
re-login the WEB interface about 60 seconds later, the screen in Figure 4-2-26 appears.
Figure 4-2-26 System Reboot page screenshot
Yes : Click to reboot device.
No : Click to return to the Welcome page without rebooting.
You can also check the SYS LED at the front panel to identify the System is load completely or not. If the SYS LED is blinking,
then it is in the firmware load stage; if the SYS LED light on, you can use the WEB browser to login the Switch.