ProSoft Technology MVI56E-MNETC - Manual (Page 63)

MVI56E-MNETC ♦ ControlLogix Platform Configuring the MVI56E-MNETC Module
Modbus TCP/IP Client Enhanced Communication Module User Manual
ProSoft Technology, Inc. Page 63 of 183
February 3, 2013
4 In the Connection Setup dialog box, click the B ROWSE D EVICE ( S ) button to
open the ProSoft Discovery Service. Select the module, then right-click and
choose A
SSIGN T EMPORARY IP.
5
The module’s default IP address is 192.168.0.250. Choose an unused IP
within your subnet, and then click OK.
Important: The temporary IP address is only valid until the next time the module
is initialized. For information on how to set the module’s permanent IP address,
see Ethernet Configuration (page 60).