Connect your pc to the processor – ProSoft Technology MVI71-MCM User Manual
Page 13
Start Here
MVI71-MCM ♦ PLC Platform
Modbus Communication Module
ProSoft Technology, Inc.
Page 13 of 111
December 28, 2007
4
Check that the holding clips on the top and bottom of the module are securely
in the locking holes of the rack.
5
Make a note of the slot location. You will need to identify the slot in which the
module is installed in order for the sample program to work correctly. Slot
numbers are identified on the green circuit board (backplane) of the PLC
rack.
6
Turn power ON.
Note:
If you insert the module improperly, the system may stop working, or may
behave unpredictably.
1.5
Connect your PC to the Processor
7
Connect the right-angle connector end of the cable to your controller at the
communications port.
8
Connect the straight connector end of the cable to the serial port on your
computer.