ProSoft Technology MVI71-MCM - Manual (Page 15)

Start Here MVI71-MCM ♦ PLC Platform
Modbus Communication Module
ProSoft Technology, Inc. Page 15 of 111
December 28, 2007
5 When the download is complete, RSLogix will open another confirmation
dialog box. Click OK to switch the processor from Program mode to Run
mode.
Note: If you receive an error message during these steps, refer to your RSLogix
documentation to interpret and correct the error.
1.6.1 Configuring RSLinx
¾ If RSLogix is unable to establish communication with the processor,
follow these steps:
1 Open RSLinx.
2 Open the Communications menu, and choose Configure Drivers.
This action opens the Configure Drivers dialog box.