Roland FP-E50 88-Key Portable Digital Piano - Manual (Page 72)

Convenient Functions (Utility)
72 72
Exporting a Scene (Export Scene)
You can export the scene data to an SVD file.
1.
You can connect a USB flash drive here .
2.
On the Utility screen, use the [ дд ] [ ее ] buttons to select
“Import/Export” and press the [Enter] button .
3.
Use the [ дд ] [ ее ] buttons to select “Export Scene” and
press the [Enter] button .
4. Use the [ дд ] [ ее ] buttons to select the scene you wish to
export, and press the [1] ([Piano])–[5] ([Other]) buttons
to select the appropriate check boxes .
How to select with the check marks
Controller Explanation
[1] Mark-
Removes the check mark and moves the
cursor forward one scene.
[2] Mark+
Adds a check mark and moves the cursor
forward one scene.
[3] Clear All Removes all check marks.
[4] Mark All Adds all check marks.
[5] Mark Toggle
Switches between adding and removing the
check marks.
5. Press the [Enter] button .
6. Confirm/edit the name of the file to export .
If you wish to edit the filename, follow the steps below.
Ø “Editing a Name (Rename Screen)” (p. 15)
7. Press the [Enter] button .
A confirmation message appears.
If you decide to cancel, select “Cancel” and press the [Enter] button.
MEMO
If the same filename already exists, a confirmation dialog box with the
message “Already Exist . Overwrite?” is shown, asking if you wish to
overwrite the filename .
8. Use the [ зз ] [ жж ] buttons to select “OK”, and then press
the [Enter] button .
When export is finished, the message “Completed!” appears.
NOTE
Never turn off the power or disconnect the USB flash drive while the
“Executing…” display or a similar message is shown.