Roland FP-E50 88-Key Portable Digital Piano - Manual (Page 75)

Convenient Functions (Utility)
75 75
Exporting the Chord Pattern
(Export Chord Pattern)
You can export the chord pattern as a file.
1.
You can connect a USB flash drive here .
2.
On the Utility screen, use the [ д ] [ е ] buttons to select
“Import/Export” and press the [Enter] button .
3.
Use the [ дд ] [ ее ] buttons to select “Export Chord Pattern”
and press the [Enter] button .
NOTE
If no user chord pattern exists on this instrument, “Initial Pattern” appears in
gray, and the data can’t be exported.
4.
Use the [ дд ] [ ее ] buttons to select the chord pattern to
export, and press the [1] ([Piano])–[5] ([Other]) buttons
to select the appropriate check boxes .
5. Press the [Enter] button .
A confirmation message appears.
If you decide to cancel, select “Cancel” and press the [Enter] button.
6.
Use the [ зз ] [ жж ] buttons to select “OK”, and then press
the [Enter] button .
When export is finished, the message “Completed!” appears.
MEMO
The exported data is saved in the “ROLAND/CHORD_PTN/” subfolder on the
USB flash drive.
NOTE
Never turn off the power or disconnect the USB flash drive while the
“Executing…” display or a similar message is shown.
Initializing a USB Flash Drive
(Format USB Memory)
Here’s how to initialize a USB flash drive.
1.
Connect the USB flash drive to the USB Memory port .
2.
On the Utility screen, use the [ дд ] [ ее ] buttons to select
“Format USB Memory” and press the [Enter] button .
A confirmation message appears.
If you decide to cancel, select “Cancel” and press the [Enter] button.
3.
Use the [ зз ] [ жж ] buttons to select “OK”, and then press
the [Enter] button .
Once the initialization is finished, the message “Completed!” is shown and
the display returns to the Utility screen.