Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 32)

32
In this case, press the P/T RST (pan/tilt reset) button to
reset the pan/tilt position.
Zoom control
The camera zoom can be operated using either the
ZOOM ring on the top of the joystick or the ZOOM
lever in the lens control block.
You can set which is used to control the zoom using
CONFIG >RM SETUP >ZOOM in the RM menu.
For details about configuration, see “RM SETUP”
(page 51).
You can adjust the zoom speed using the ZOOM SPEED
knob on the lens control block.
To control the zoom using the ZOOM ring
on the top of the joystick
1
Select the target camera to control.
For details about selection, see “Selecting a
Camera” (page 29).
2
Press the ACTIVE button, turning it on
(button is lit), on the joystick control block.
3
Turn the ZOOM ring on the top of the
joystick counterclockwise/clockwise.
Release the joystick to stop zooming.
Note
When you perform pan/tilt operation while the camera is
in telephoto mode, the speed of movement of the image
on the screen may appear erratic.
To control the zoom using the ZOOM
lever on the lens control block
1
Select the target camera to control.
For details about selection, see “Selecting a
Camera” (page 29).
2
Press the ACTIVE button, turning it on
(button is lit), on the lens control block.
3
Move the ZOOM lever left/right.
Moving the lever to the left makes the subject
appear smaller (Wide angle).
Moving the lever to the right makes the subject
appear larger (Telephoto).
The zoom speed changes depending on the pressure
applied to the lever and the setting of the ZOOM
SPEED knob.
Turning the ZOOM SPEED knob clockwise
increases the zoom speed, and turning
counterclockwise decreases the zoom speed.
You can change the direction of the zoom lever
using CONFIG >DIRECTION in the RM menu
(page 51).
STANDBY blinks.
2
3
Subject appears
smaller.
(Wide angle) Subject appears
larger.
(Telephoto)
2
3