Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 33)

33
Adjusting a Camera
The functions that can be operated vary depending on
the camera model and configuration. For details, see
“Function of Buttons/Knobs in Each Block by Camera
Model” (page 45).
Adjusting the focus
1
Select the target camera to control.
For details about selection, see “Selecting a
Camera” (page 29).
2
Press the ACTIVE button, turning it on
(button is lit), on the lens control block.
The lens control block becomes enabled.
To adjust the focus automatically
Press the AUTO FOCUS mode button, turning it on
(button is lit yellow).
Auto focus mode is activated.
In auto focus mode, the camera focuses on the subject in
the center of the screen automatically.
To adjust the focus manually
Press the AUTO FOCUS mode button, turning it off
(button is not lit). Turn the FOCUS knob
counterclockwise/clockwise to adjust the focus while
monitoring the image of the subject.
The focus speed is set using the FOCUS SPEED knob.
Turning the knob clockwise increases the focus speed,
and turning counterclockwise decreases the focus speed.
One-push auto focus during manual
focus adjustment
Press the O.P.A.F (one-push auto focus) button. The
button blinks yellow for a few seconds, and then the
camera focuses on the subject in the center of the screen
automatically.
Adjusting the brightness
1
Select the target camera to control.
For details about selection, see “Selecting a
Camera” (page 29).
2
Press the ACTIVE button, turning it on
(button is lit), on the lens control block.
To adjust the exposure automatically
Press the AE button, turning it on (button is lit).
To adjust the exposure manually
1
Set CONFIG >RM SETUP >AE CONFIG to
MANUAL or IRIS Pri in the RM menu.
For details about AE CONFIG, see “AE CONFIG”
(page 51).
2
Press the AE button, turning it off (button is
not lit).
3
Turn the IRIS knob to adjust the iris of the
camera.
Operation using IRIS, GAIN, and
SHUTTER buttons
1
Set CONFIG >RM SETUP >AE CONFIG to
MANUAL, IRIS Pri, GAIN Pri, or SHUTTER
Pri in the RM menu.
For details about AE CONFIG, see “AE CONFIG”
(page 51).
2
Press the AE button, turning it off (button is
not lit).
3
Press the IRIS, GAIN, or SHUTTER button
on the menu control block.
The setting is displayed on the LCD panel and can
be adjusted using the VALUE knob (FUNCTION
menu).
2
Auto adjust
One-push auto adjust
Manual adjust
2
Auto adjust
Manual adjust