Sony Signature Series NW-WM1ZM2 Walkman Digital Music Player - Manual (Page 51)

51
Location and Function of the
Screen Common Parts
This section explains the location and function of
the screen common parts.

Camera name
Displays the camera name.
The name can be changed on [Camera
Name] under [Network] on the Web App
menu.
 Power Switch
When turning on the camera, [Power ON] is
displayed. When [Power Standby] is selected
when the switch is pressed down, the
camera’s power goes into the Standby.
When [Power ON] is selected when the
switch is pressed down while [Power
Standby] is displayed, the camera turns on.

Switching section of the operation screen
Press the tab to change the operation
screen.
[Live] tab: Displays the live operation
screen.
[PTZ Auto Framing Settings] tab: Displays
the PTZ Auto Framing setting screen.
[Settings] tab: Displays the setting screen
(Web App menu).

Temperature abnormality warning
A warning is displayed when the internal
temperature is high.
After the power is turned off, do not use the
camera until it cools down.
 Streaming distribution status display
Displayed while a stream is being distributed
(only when the streaming setting is set to
[SRT-Caller]).

Screen operation lock switch
(Operation Unlock): Turn the switch to
the left to operate the live operation
screen.
(Operation Lock): Turn the switch to
the right to lock the operation of the live
operation screen in order to prevent
malfunctions.
Live Operation Screen
Location and Function of the Live
Operation Screen
This section explains the location and function of
the live operation screen.

PTZ Auto Framing operation section
The PTZ Auto Framing function keeps
shooting the moving subject under an
optimum composition, rotating the camera
up, down, left, right, zoom in or zoom out
automatically based on the shot video. To
use the PTZ Auto Framing, in advance the
initial setting on the PTZ Auto Framing
setting tab is required. For details of the
initial setting, refer to “Location and function
of the PTZ Auto Framing Setting Screen”
(page 54). Also, for details of the operation
of the PTZ Auto Framing refer to “Location
and function of PTZ Auto Framing execution
screen” (page 58).

Camera’s video section
Displays the video while shooting.
When performing the PTZ Auto Framing and
Detected Indicator (page 57) is valid,
Detected Indicator is displayed.
Also, the red frame is displayed around the
video depending on the external tally lamp
signal.

Camera’s operation section
Sets the necessary functions that operate
the camera. Switches the displayed screen
using the screen top tab.
ɞ ɟ ɣ ɢ ɠ ɡ
ɞ ɟ
ɡ ɢ
ɠ