HP Z40c G3 39.7" 21:9 Curved 5K IPS Monitor - Manual (Page 17)

● Connect one end of an HDMI cable to the HDMI port on the rear of the monitor and the other end to
the HDMI port on the source device.
NOTE: You must connect the USB Type-C to USB cable between the monitor and source device
(computer) to enable HP Device Bridge and the USB ports on the monitor (the USB Type-C to USB
cable is included in select regions).
● Connect one end of a Thunderbolt cable to the Thunderbolt port on the rear of the monitor and the
other end to the Thunderbolt port on the source device. (Use only the HP-approved Thunderbolt
cable provided with the monitor.)
● Connect one end of a network cable to the network jack on the monitor and the other end to a
network wall jack or router.
12 Chapter 1 Getting started