RED DIGITAL CINEMA DSMC2 BRAIN with HELIUM 8K S35 Sensor (2018 Unified DSMC2 Lineup) - Manual (Page 179)

3. On the Slave camera(s), follow the instructions below:
A. Go to Menu > Settings > Setup > Communication .
B. Type a name for the camera (Example: CAM B, RIGHT, SLAVE, etc) in the Camera ID field.
C. Set Target to None .
Figure: Slave Settings
D. Go to Menu > Settings > Setup > Communication and select the Ethernet tab.
E. Select the Camera to Camera check box.
The LAN indicator in the Lower Status Row illuminates green.
NOTE: Cameras can also be set up in a Master/Master configuration. To set up Master/Master, set Target to All
on both cameras, allowing either camera to make changes and control record start/stop.
REQUIRED CABLE
790-0163 : Master/Slave Gig-E Cable (4')
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC 9 5 5 - 0 1 6 8 _V 7 .1 , R EV - M | 1 7 9
DSMC2 HELIUM OPERATION GUIDE