Settings – Teac NT-505-X USB DAC / Network Media Player (Black) User Manual
Page 21
EN
21
Settings
1
Press the MENU button to open the menu
screen.
2
Turn the SOURCE knob to show the item that
you want to set.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
The menu items appear in the following order.
UPCONVERT
DIGITAL FILTER(PCM)
CLOCK SYNC NETWORK
CLCOK SYNC USB
CLCOK SYNC COAXIAL1
CLCOK SYNC COAXIAL2
CLCOK SYNC OPTICAL1
CLCOK SYNC OPTICAL2
VERSION INFO
AUTO POWER SAVING
DISPLAY TYPE
VOLUME TYPE
DIMMER
LINE OUT LEVEL
LINE OUT SELECT
3
Press the SOURCE knob.
o
You can also press the ENTER button on the remote control.
o
The currently set value is shown on the display.
4
Turn the SOURCE knob to change the setting
value.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
o
Press the MENU button to return to setting item selection.
5
Press the SOURCE knob.
o
You can also press the ENTER button on the remote control.
6
When you are done changing settings, press
the MENU button to show the input source sta-
tus again.
o
If you do not do anything for about 7 seconds, the display
will return to showing the input source status.