Eurotech Appliances EWF272EL - Manual (Page 25)

25 Specifications are subject to change without notice. See owner’s manual for additional details.
Stacked Laundry Installations
EWF150 WASHER AND EDV158 DRYER
Unit Dimensions
WARNING!
Never stack a washer on top of a dryer!
Secure the dryer to the top of the washer with the stacking kit designed specifically for
these appliances. (See page 10.)
These appliances must be properly grounded. Refer to the owner’s manual for instructions.
Installation should be carried out by a qualified person who is familiar with all local codes and
ordinances for electrical connections. Incorrect installation may cause damage and/or injury. Second-
floor (above grade) installations must meet all local building codes.
When placing the stacked pair next to a wall or cabinet, be sure to leave 1/2” (12 mm) of space
between the units and the wall or cabinet.
The washer drain outlet should be positioned at a height between 23” (584 mm) and 35” (889 mm)
from the bottom of the unit.
See page 19 for venting requirements.
23-3/8
594 mm
66-1/2" 1689 mm
38-3/8"
975 mm
22-7/8"
581 mm
36-7/8"
937 cm
35" to v
ent
889 mm
Vent
21-3/8"
543 mm