Adjusting audio delay (audio delay), P. 58) – Denon AVR-S570BT 5.2-Channel A/V Receiver User Manual
Page 58
Adjusting audio delay (Audio Delay)
Compensates for incorrect timing between video and audio.
1
Press OPTION.
The option menu screen is displayed.
2
Use
ui
to select “Audio Delay”, then press ENTER.
The “Audio Delay” screen is displayed.
3
Use
o
p
to adjust the timing.
0 ms – 200 ms (Default : 0 ms)
0
“Audio Delay” settings are stored for each input source.
0
The “Audio Delay” settings can be set even if AUDIO DELAY + or AUDIO DELAY -
is pressed on the remote control unit.
Optimizing the night time listening
volume (Night Mode)
Compress dynamic range (difference between loud and soft sounds).
This can be set when a Dolby Digital signal is input.
1
Press OPTION.
The option menu screen is displayed.
2
Use
ui
to select “Night Mode”, then press ENTER.
The Night Mode setting screen is displayed.
3
Use
o
p
to select “Night Mode”, then press ENTER.
Low :
Set the adjusted value to low.
Medium :
Set the adjusted value to middle.
High :
Set the adjusted value to high.
Auto :
Automatic dynamic range compression
on/off control according to the source.
Off
(Default):
Do not set.
0
“Auto” can be set when a Dolby TrueHD signal is input.
0
The default setting is “Off”.
58