Emerson Liebert IntelliSlot IS-WEB485ADPT - Manual (Page 26)

Network Settings
22
5.4.3 Install Security Certificates - Internet Explorer 7 or later
If you use Internet Explorer 7 or later and select HTTPS as the operation mode of the Web server (see
5.4.1 - Specify Web Server Settings), follow these instructions to install a security certificate.
To do this:
• Open Internet Explorer and enter https:// followed by the IP address or hostname of the Web
card—for example, https://192.168.0.125—in the address bar. The following message appears.
• Click on Continue to this website (not recommended) to open a connection to the Web card.
• Click the Certificate Error box next to the address bar, shown above left.
• In the window that pops up, shown above right, click the View Certificates link. This opens the
Certificate window.
• In the Certificate window, above left, click the Certificate Path tab.
• In the Certificate Path tab, above right, click on Allegro Root CA, then on View Certificate.
Continue to
this website
Certificate
Error
View
Certificates
View
Certificate
Certificate
Path tab