HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 69)

2Ć44 Installation and Configuration
To set the HP FAX-750 handset for pulse dialing, slide the DIAL switch to the left. See Figure 2-45.
Figure 2Ć45. Setting the HP FAXĆ750 Handset for Pulse Dialing
Setting the Pulse Dialing Method on the HP FAX-900 and FAX-950
Your HP FAX-900 or FAX-950 is factory set for touchtone dialing. If you connect your fax machine to a pulse dialing
system, you will need to configure the fax machine for pulse dialing.
Configuring for tone or pulse dialing requires setting fax parameter 6 to tone or pulse dialing.
To configure for tone or pulse dialing, press the buttons in the sequence shown and enter the necessary information
where requested.
Menu
7
Set
Stop Set
4
6 0
Set
1. Pulse
2. Tone