HP 5400ZL - Manual (Page 261)

Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
problem if the configured priorities are acceptable for all applications that
use the same DSCP (see “Notes on Changing a Priority Setting” on page
6-91).
Note that a DSCP codepoint must have an associated priority before you
can use it to mark matching packets.
The DSCPs for this
example have not yet
been assigned an
802.1p priority level.
Figure 6-10. Display the Current DSCP-Map Configuration
2. Configure the priorities for the DSCPs you want to use to mark packets.
DSCP policies with an
802.1p priority
Figure 6-11. Assigning 802.1p Priorities to the Selected DSCPs
6-39